Vol. 10 Proceedings of AMME'2001 (9-13 December 2001)
  • Preface
    L.A. Dobrzański (Gliwice, Poland)
  • Eulogy connected with granting Professor Maria Helena Robert, Professor Saleem Mohammed Sarwar Jang Hashmi and Professor Boris Ivanov Tomov the honorary award in the name of Professor Fryderyk Staub for year 2000
    L.A. Dobrzański (Gliwice, Poland)
  • Key issues for effective surface engineering through thin film coating
    M.S.J. Hashmi (Dublin, Ireland)
  • Metal alloys solidification, metal matrix composites and semi-solid technology
    M.H. Robert (Campinas, Brazil)
  • An example of determination of preforming steps for hot die forging
    B. Tomov, R. Radev (Russe, Bulgaria)
  • Stand off’s indirect estimation in GMAW
    S.C. Absi Alfáro, G.C. Carvalho (Brasil, Brazil)
  • Wytwarzanie elementów kutych metod± obróbki cieplno-mechanicznej
    J. Adamczyk, M. Opiela, A. Grajcar (Gliwice, Poland)
  • Integration concept of CAM system and tool diagnostic system in optimisation of machining processes
    Z. Adamczyk (Cracow, Poland)
  • PM AA6061/(Ti3Al)p composite powder obtained by mechanical milling
    M. Adamiak, J.B. Fogagnolo, E.M. Ruiz-Navas, L.A. Dobrzański, J.M. Torralba
  • Some insights into the remote strain vs. fatigue life relationship
    H. Alus, Y. Katz, (Beer-Sheva, Israel), M.B. Maros, L. Tóth (Miskolc, Hungary)
  • Thermo-mechanical behaviour of solder joint in electronic assemblies under use and test conditions;impact on reliability
    V. Audigier, S. Lasserre, J.L. Lataillade (Talance Cedex, France)
  • FLD theoretical model using a new anisotropic yield criterion
    D. Banabic, D.S. Comsa, P. Jurco, G. Cosovici (Cluj-Napoca, Romania)
  • Application of CAD/CAM modelling of shape anvils in free hot forging of long product
    G. Banaszek, H. Dyja, S. Berski (Częstochowa, Poland)
  • Mechanical stability of retained austenite in austempered silicon steels
    A. Barbacki, E. Mikołajski, Sz. Głowacki (Poznań, Poland)
  • Analysis of computer simulation of bimetallic rod extrusion process
    S. Berski, G. Banaszek, H. Dyja (Częstochowa, Poland)
  • Evaluation of C-Mn steel susceptibility to hydrogen embrittlement
    P. Betáková, J. Sojka, L. Hyspecká, L. Cízek (Ostrava, Czech Republic)
  • Mechanical properties ofcorrosion layers grown on Zr-based alloys
    O. Bláhová, J. Koutský, S. Houdková (Plzen, Czech Republic)
  • Hypergraphs and structural numbers as the tool of modification of mechanical bar systems with cascade structure
    A. Buchacz (Gliwice, Poland)
  • Computer simulation of induction hardening
    F. Cajner, B. Smoljan, D. Landek (Zagreb, Croatia)
  • About a CAT model consistent with ISO/TC 213 last issues
    P. Chiabert, M. Orlando (Torino, Italy)
  • Wpływ stopnia i temperatury odkształcenia na strukturę i własności mechaniczne podczas przemiany fazowej w stopie Fe-30%Ni
    F. Ciura, A. Kruk, G. Michta, W. Osuch (Kraków, Poland)
  • Structure and properties of the selected magnesium alloys
    L. Cízek, R. Korený, I. Juricka, J. Maisner, M. Greger, S. Lasek, P. Betáková (Ostrava, Czech Republic), A. Hernas (Katowice, Poland)
  • Simulation of the hydroforming process using a new orthotropic yield criterion
    S. Comsa, G. Cosovici, P. Jurco, D. Banabic (Cluj-Napoca, Romania)
  • System for optimization of modular fixtures
    F. Cus, U. Zuperl, J. Balic (Maribor, Slovenia)
  • Microstructural characterisation of nitrided and carbonitrided titanium biomaterials
    A. Czyrska-Filemonowicz, M. Łucki, M. Biel, B. Dubiel (Cracow, Poland), K. Spiradek-Hahn (Seibersdorf, Austria), E. Czarnowska,T. Wierzchoń (Warsaw, Poland)
  • Deposition and some properties of doped diamond-like carbon coatings for tribological applications
    A. Czyżniewski, W. Precht (Koszalin, Poland)
  • Study of the microstructure and hardness of pipes from the heat exchanger of the fuel camera of thermal power station “Maritza Iztok”
    P.S. Danev (Rousse, Bulgaria)
  • Study of the chemical of slag, precipitated on the heating surfaces in the furnace camera of energy boilers P-62
    P.S. Danev, (Rousse, Bulgaria), B. Bonev, T. Totev, A. Grigorov (Sofia, Bulgaria)
  • Study of the structure of slag, precipitated on the heating surfaces in the furnace camera of energy boilers burning out low-quality brown coal
    P.S. Danev, (Rousse, Bulgaria), T. Totev, B. Bonev (Sofia, Bulgaria)
  • High temperature sorbents for oxygen
    E. David, (Rm. Valcea, Romania), D. Axente, (Cluj-Napoca, Romania), A. Armeanu (Rm. Valcea, Romania)
  • Methodology for sodium covering at polytetrafluoroehtylene surface
    E. David, A. Lazar, A. Armeanu (Rm. Valcea, Romania)
  • A method of designing of polymer composites for impact loading
    K. Dobrucki (Zielona Góra, Poland)
  • Stopowanie węglikiem wolframu WC stali WCLV przy użyciu lasera diodowego dużej mocy (HPDL)
    L.A. Dobrzański, M. Bonek, A. Klimpel, A. Lisiecki (Gliwice, Poland)
  • Struktura i własności twardych przeciwzużyciowych powłok naniesionych w procesie katodowego odparowania łukowego na podłoże z węglików spiekanych
    L.A. Dobrzański, K. Gołombek, (Gliwice, Poland), J. Kopac, M. Soković (Ljubljana, Slovenia)
  • Wpływ warunków nanoszenia na odporność erozyjną powłok uzyskanych w procesie PVD na podłożu ze spiekanej stali szybkotnącej
    L.A. Dobrzański, W. Kwaśny, (Gliwice, Poland), R. Shishkov, B. Tomov (Rousse, Bulgaria), S. Bugliosi, G.E. D’Errico (Torino, Italy)
  • Wpływ metody odlewania stopów aluminium i parametrów anodowania na strukturę i grubość warstwy anodowej
    L.A. Dobrzański, K. Labisz, J. Konieczny, (Gliwice, Poland), J. Duszczyk (Delft, The Nederlandes)
  • Przemiany austenitu przechłodzonego w stali narzędziowej do pracy na gor±co 47CrMoWVTiCeZr16-26-8
    L.A. Dobrzański, J. Mazurkiewicz, E. Hajduczek
  • Własności trybologiczne twardych warstw powierzchniowych nanoszonych techniką PVD na podłoże z mosiądzu
    L.A. Dobrzański, K. Lukaszkowicz, (Gliwice, Poland), S. Bugliosi, G. D’Errico (Torino, Italy), T. Tański (Gliwice, Poland)
  • Porównanie struktury i własności stali szybkotn±cych wytwarzanych metodami HIP, P/M i PIM
    L.A. Dobrzański, G. Matula, (Gliwice, Poland), A. Várez, B. Levenfeld, J.M. Torralba (Madrid, Spain)
  • Zastosowanie sieci neuronowych do analizy obrazów metalograficznych
    L.A. Dobrzański, W. Sitek, M. Krupiński (Gliwice, Poland)
  • Predykcja twardości stali konstrukcyjnych chłodzonych z temperatury austenityzowania
    L.A. Dobrzański, J. Trzaska, R. Maniara (Gliwice, Poland)
  • Zastosowanie sztucznych sieci neuronowych do wyznaczania temperatur Ac1 i Ac3 stali konstrukcyjnych
    L.A. Dobrzański, J. Trzaska, K. Pozimska (Gliwice, Poland)
  • Characteristics of the shape memory materials in relation to the mach inability impact
    S. Dolinsek, J. Kopac (Ljubljana, Slovenia)
  • Ultra-strong and ductile nanocrystalline materials – myth or reality?
    M. Dollár, A. Dollár (Oxford, USA)
  • Wpływ odkształcenia plastycznego na zimno i obróbki cieplnej na niektóre własności magnetyczne i elektryczne stopu FeNi42Cr5Ti2Al typu elinwar
    R. Domagała (Gliwice, Poland)
  • The structure and matrix microhardness of the 319 mluminum mlloy mfter isothermal holding during the solidification process
    W. J. Evans, (Dearborn, USA), W. Kasprzak, (Gliwice, Poland, Windsor, Canada), M. Kasprzak, (Gliwice, Poland), C.A. Kierkus, W.T. Kierkus, J.H. Sokolowski (Windsor, Canada)
  • Confrontation of computer and physical hot-rolling simulation of flat slabs with embedded pins
    R. Fabík, J. Kliber (Ostrava – Poruba, Czech Republic)
  • Structures and applications of mechanically alloyed aluminium and hematyte powders
    B. Formanek, K. Berdej, R. Przeliorz (Katowice, Poland)
  • Influence of finish forging temperatures on structure and properties of forged pieces made of C-Mn micro-alloyed steels
    M. Greger, L. Cízek, R. Fabík (Ostrava-Poruba, Czech Republic)
  • Processing of Al-Si/Al2O3 in situ co-continuous composite by displacement reaction induced on Al-5SiO2 fiber composite
    E.N. Gregolin, H. Goldenstein, (Sao Paulo, Brazil), R.G. dos Santos (Campinas, Brazil)
  • Wpływ procesu relaksacji strukturalnej i krystalizacji na zmiany własności szkła metalicznego na osnowie kobaltu
    S. Griner, M. Spilka (Gliwice, Poland)
  • Deformation processing map for control of microstructure in CuZn37.7Pb2 brass
    Z. Gronostajski (Wrocław, Poland)
  • The effect of phase transformation on the limit strain of aluminium bronze
    Z. Gronostajski (Wrocław, Poland)
  • Joining of γ-TiAl by active metal brazing
    A. Guedes, A.M.P. Pinto, (Guimarães, Portugal), M.F. Vieira, F. Viana (Porto, Portugal)
  • Development of high qulity worm drives
    C. Gyenge (Cluj-Napoca, Romania)
  • Casting of composite strip using a twin roll caster
    T. Haga, (Osaka, Japan), S. Suzuki (Berlin, Germany)
  • Semisolid strip casting of A356 aluminium alloy
    T. Haga, (Osaka, Japan), S. Suzuki (Berlin, Germany)
  • High-temperature chlorine-sulfur corrosion of high alloy heat-resisting steels
    A. Hernas, M. Imosa, B. Formanek, (Katowice, Poland), J. Cizner (Praha, Czech Republic)
  • Basics of education quality assurance system. ING –PAED certificate
    A. Hernas, Cz. Sajdak, S. Markusik (Katowice, Poland)
  • Finite element simulation of tip test with an aluminum alloy
    Y.T. Im, S.H. Kang, J.-S. Cheon (Taejon, Korea)
  • Energia aktywacji procesu odkształcenia na gorąco wybranych stali konstrukcyjnych
    E. Kalinowska-Ozgowicz, D. Szewieczek (Gliwice, Poland)
  • Iron-molybdenum structural parts with boron addition
    J. Karwan-Baczewska (Kraków, Poland)
  • Mechanical margins against failure- critical concerns on various theoretical/experimental interfaces
    Y. Katz (Beer-Sheva, Israel)
  • Simulation of powder forming processes using an endochronic theory in finite deformation plasticity
    A.R. Khoei, M. Mofid, A. Bakhshiani (Tehran, Iran)
  • The influence of Cr on tool wear by machining
    J. Kopac, B. Sterle (Ljubljana, Slovenia)
  • Test of the influence of the proadhesive agent in the form of water solution of aminosilane on some physical and processing properties of polyoxymethylene composites with the microspheres from fly ashes
    J. Koszkul, D. Kwiatkowski (Częstochowa, Poland)
  • Optical monitoring of the polymers flow in the mold cavity during the injection process
    J. Koszkul, J. Nabiałek (Częstochowa, Poland)
  • 3-D Modelling of blow moulding by the Polyflow software
    J. Koszkul, K. Szczepański (Częstochowa, Poland)
  • Thermomechanical treatment of austenitic Cr-Mn-N steel
    J. Koutský (Plzeò, Czech Republic)
  • Modelling of relaxation processes in coatings
    Ch.N. Kouyumdjiev, Ts.L. Leontieva (Rousse, Bulgaria)
  • Genetic algorithm method for cutting optimisation of Monel alloy
    M. Kovacic, J. Balic (Maribor, Slovenia)
  • Liquid erosion of aluminum brass CuZn21Al2
    S. Król (Opole, Poland)
  • Friction and wear properties of titanium and oxidised titanium in dry sliding against hardened AISI 1045 steel
    S. Król, L. Ptacek, Z. Zalisz, M. Hepner (Opole, Poland)
  • Zastosowanie analizy widmowej sygnału ultradżwiękowego do określenia grubości cienkich warstw
    A. Kruk (Kraków, Poland)
  • Zastosowanie metod cyfrowej analizy obrazu w badaniach niskokątowych granic ziaren
    A. Kruk, W. Osuch (Kraków, Poland)
  • Wpływ niejednorodności mikrostruktury odkuwek matrycowych
    K. Kubiak, M. Motyka, J. Sieniawski, W. Ziaja (Rzeszów, Poland)
  • The influence of zirconium on magnetic properties and crystallisation of amorphous alloys based on iron
    P. Kwapuliński, A. Chrobak, J. Rasek, Z. Stokłosa, G. Haneczok (Katowice, Poland)
  • Oszacowanie umocnienia wydzieleniowego w starzonej po walcowaniu stali ULCB
    J. Lis, P. Wieczorek, A.K. Lis (Częstochowa, Poland)
  • Engineering materials database design
    J. Madejski, A. Rachwał (Gliwice, Poland)
  • Użyteczność biomechaniczna stabilizatorów Polfix w złamaniach wielopoziomowych
    J. Marciniak, M. Kaczmarek (Gliwice, Poland)
  • Zastosowanie metod magnetycznych do pomiaru termicznej stabilności austenitu resztkowego w bainitycznych stalach niskowęglowych
    G. Michta, W. Osuch, A. Kruk, J. Pietrzyk (Kraków, Poland)
  • Effect of the thixoforging operation on the microstructure of AA 2001 Alloy
    M. Montel Rovira, (Curitiba, Brazil), M. H. Robert (Campinas, Brazil)
  • Integrating quality management and cost accounting
    J. Mrsa, B. Smoljan (Rijeka, Croatia)
  • Machining of parts of agricultural machines
    B. Mursec, T. Ploj, F. Cus (Maribor, Slovenia)
  • Assessment of vacuum brazed joints 14 - 5 PH steel - 82Au 18Ni solder
    J. Nowacki, (Szczecin, Poland), M. Danielewski, R. Filipek (Kraków, Poland)
  • Minimalizacja czasu wytwarzania proszkowego materiału nanokrystalicznego ze szkła metalicznego Fe78Si13B9
    R. Nowosielski, P. Gramatyka, S. Griner, J. Konieczny, L. A. Dobrzański (Gliwice, Poland)
  • Przemiany zachodz±ce podczas kombinowanej nanokrystalizacji termiczno – mechanicznej szkła metalicznego Fe-B-Si
    R. Nowosielski, P. Gramatyka, S. Griner, J. Konieczny, L.A. Dobrzański (Gliwice, Poland)
  • Tłumienie pól elektromagnetycznych przez ekrany ze szkła metalicznego Co70,5Fe2,5Mn2Mo1Si9B15
    R. Nowosielski, S. Griner (Gliwice, Poland)
  • Zrównoważona technologia elementem współczesnych metod zarządzania produkcją
    R. Nowosielski, M. Spilka (Gliwice, Poland)
  • Wpływ procesów walcowania i ciągnienia na niejednorodność umocnienia stalowych prętów kwadratowych
    T. Oczkowicz (Gliwice, Poland)
  • Wydzielanie węglikoazotków wanadu w stalach niskowęglowych o podwyższonej wytrzymałości zachodzące w zakresie austenitycznym
    W. Osuch, F. Ciura, A. Kruk, G. Michta (Kraków, Poland)
  • Struktura i własności niskowęglowej stali bainitycznej
    W. Osuch, A. Kruk, G. Michta, J. Pietrzyk (Kraków, Poland)
  • Analiza plastyczności i umocnienia brązów cynowych odkształcanych w podwyższonych temperaturach
    W. Ozgowicz (Gliwice, Poland)
  • Kinetyka przemian fazowych przy odpuszczaniu stopów modelowych z wanadem
    J. Pacyna, R. Dąbrowski (Kraków, Poland)
  • Nieodwracalna kruchość odpuszczania wstopach modelowych z manganem
    J. Pacyna, A. Kokosza (Kraków, Poland)
  • Wpływ obróbki cieplnej na morfologię ledeburytu przenienionego w stopach podeutektycznych
    J. Pacyna, J. Krawczyk (Kraków, Poland)
  • Coefficient of flexibility as criterion for investments into tools and working devices in flexible manufacturing systems
    I. Pahole, J. Balic (Maribor, Slovenia)
  • Description of the three-dimension size of the crystal grain in the solidification structure of twin-roll thin strips
    F. Pan, M. Yang, X. Peng, J. Zhang, P. Ding (Chongqing, China)
  • Structure, chemical and phase composition of hard titanium carbon nitride coatings deposited on HS6-5-2 steel
    M. Pancielejko, W. Precht (Koszalin, Poland)
  • Badania odporności korozyjnej stentów wieńcowych ze stali Cr-Ni-Mo
    Z. Paszenda, J. Tyrlik-Held (Gliwice, Poland)
  • The effects of final hot rolling temperatures and heat treatment processes on the cube texture ratio of high purity aluminum
    J. Peng, X. Li, A. Tang, J. Zhang, F. Pan (Chongqing, China)
  • The s-phase formation in alloyed materials
    G.D. Pigrova (St. Petersburg, Russia)
  • Studies on deep drawing of the aluminium A5052 alloy in the rheocast condition
    G.P. Pires, M.H. Robert, (Campinas, Brazil), R. Arrieux (Annecy-Le-Vieux, France)
  • Acoustic emission study of solid-liquid transition in GaxIn1‑x alloys
    V. Prokhorenko, S. Prokhorenko, S. Mudry, (Lviv, Ukraine), S. Filonenko, (Kiev, Ukraine), Z. Bojar (Warsaw, Poland)
  • Scheduling/rescheduling in job shop production systems
    J. Ribeiro (Campinas, Brazil)
  • Characteristics of new low-alloy steel T23 for power industry
    K. Rodak, A. Hernas, A. Kiełbus (Katowice, Poland)
  • Al based castings with improved fatigue properties
    E. Romano, M. Rosso, C. Mus (Torino, Italy)
  • Laser surface modification of plain carbon steel
    G. del Rosario, A. Várez (Leganés, Spain), H. Caudevilla, J.A. Pardo, X. de la Fuente (Zaragoza, Spain)
  • About sintering of duplex stainless steels and their properties
    M. Rosso, M. Actis Grande, D. Ornato (Torino, Italy)
  • High pressure die casting: improvement of tools life by thermal sprayed coatings
    M. Rosso, M. Actis Grande, E. Romano (Torino, Italy)
  • Electronic structure and magnetic properties of RCo9Si4 compounds (R= Y, Gd, Sm, Tb)
    I. Shcherba, (Lviv, Ukraine, Kraków, Poland), Yu. Gorelenko, Yu. Stadnyk, L. Romaka, L. Dobrjanska, B. Jatsyk (Lviv, Ukraine)
  • Chromium nitride deposited in a vacuum furnace by magnetron sputerring of a ferrochromium alloy
    R. Shishkov, I. Dermendjiev, M. Peev, (Rousse, Bulgaria), A. Kri¾, (Plzeò, Czech Republic), W. Kwaśny (Gliwice, Poland)
  • Effect of laser treatment on microstructure of Ti-6Al-4V titanium alloy
    J. Sieniawski, R. Filip, G. Mrówka, (Rzeszów, Poland), E. Pleszakow (Lviv, Ukraine)
  • Mathematical modeling of structure transformation and mechanical properties of quenched steel
    B. Smoljan (Rijeka, Croatia)
  • Wear of PVD coated solid carbide and mills in dry high-speed cutting (HSC)
    M. Soković, J. Kopac, (Ljubljana, Slovenia), L.A. Dobrzański, M. Adamiak (Gliwice, Poland)
  • The development of high education in the Republic of Croatia according to needs of defense systems and technologies
    V. Stojković, M. Barković, S. Domljanović (Zagreb, Croatia)
  • Phase transformation of the surface layer of the N26 type steels occurred during grinding and burnishing
    D. Szcześniak, J. Jeleńkowski, M. Marciniak, A. Witkowski (Warsaw, Poland)
  • Uszkodzenia korozyjne implantów ze stali Cr-Ni-Mo w warunkach elektrostymulacji pr±dem zmiennym
    J. Szewczenko, J. Marciniak, W. Chrzanowski (Gliwice, Poland)
  • Krystalizacja amorficznego stopu Fe85,4Hf1,4B13,2
    D. Szewieczek, S. Lesz (Gliwice, Poland)
  • Badania wstępne nad uzyskaniem kompozytów typu polimer-proszek szkła metalicznego
    D. Szewieczek, B. Ziębowicz, L.A. Dobrzański, (Gliwice, Poland)
  • Application of long-crack fracture toughness test for alumina tool ceramics
    M. Szutkowska, (Cracow, Poland), M. Boniecki (Warsaw, Poland)
  • Reprezentacja struktury grafu hybrydowego w zapisie języków programowania wysokiego poziomu
    J. Świder, K. Foit (Gliwice, Poland)
  • Macierzowe grafy hybrydowe i schematy blokowe w modelowaniu i analizie komputerowej układów mechanicznych
    J. Świder, G. Wszołek (Gliwice, Poland)
  • Optimisation of dynamic features of mine hoisting systems
    D. Tejszerska (Gliwice, Poland)
  • Badania numeryczne przedniej stabilizacji kręgosłupa szyjnego
    D. Tejszerska, W. Wolański (Gliwice, Poland)
  • Usage of QFD - quality function deployment in polish metallurgical industry
    S. Tkaczyk, M. Dudek (Gliwice, Poland)
  • Wpływ warunków obróbki cieplnej na własności stopu AlMg1Si1
    S. Tkaczyk, M. Kciuk (Gliwice, Poland)
  • Cost - quality (CQA) analysis
    S. Tkaczyk, J. Michalska (Gliwice, Poland)
  • Badanie efektywności procesów logistycznych narzędziem wspomagającym tworzenie łańcuchów zarządzania dostawami
    S. Tkaczyk, M. Roszak (Gliwice, Poland)
  • Investigation of properties of Ni–RuO2 coatings
    S. Tkaczyk, S. Topolska (Gliwice, Poland)
  • Wspomaganie procesu tworzenia dokumentacji Systemu Zarządzania Jakością
    S. Tkaczyk, M. Widomska-Idczak (Gliwice, Poland)
  • Welding of reinforcing bars
    J. Tusek (Ljubljana, Slovenia)
  • Influence of tribological conditions on the dry friction mechanism of PVD Zr-C:H hard coatings
    W. Walkowiak, W. Precht (Koszalin, Poland)
  • Microstructure evidence of flow softening in titanium aluminde containing Ni
    J. Zhang, Y. Li, X. Su, (Beijing, China), E. Strom, (Gothenburg, Sweden), Z. Zhong, (Beijing, China), Ch. Li (Gothenburg, Sweden)
  • Springback compensation in the die surface geometry using numerical simulation
    Z. Zimniak (Wrocław, Poland)
  • The influence of rolling on the structure of Ti 6Al 4V
    M. Zitòanský, L. Caplovic, (Trnava, Slovak Republic), M. Greger (Ostrava, Czech Republic)
  • Wpływ temperatury odpuszczania na pękanie korozyjne blachy ze stali mikrostopowej do ulepszania cieplnego Weldox 900
    J. Adamczyk, W. Krukiewicz (Gliwice, Poland)
  • Numerical simulation of a rolling process
    E. Armentani, F. Caputo jr., R. Esposito
  • Precipitation processes occurring during heat treatment of the newly developed Al-Mg-Cu-Zn alloy for car chassis
    L.A. Dobrzański, K. Labisz, (Gliwice, Poland), A. Olsen, P. Zagierski (Oslo, Norway)
  • Structure of oxide layers on plasma sprayed coatings with Fe-Al intermetallic alloys
    B. Formanek, B. Szczucka-Lasota, L. Pająk (Katowice, Poland)