- High speed end milling of aisi 304 stainless steel using new geometrically developed carbide inserts (1.353)
Abou El Hossein K. (Kayang, Malaysia), Yahya Z. (Kayang, Malaysia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure and mechanical properties of dp-type and trip-type sheets obtained after the thermomechanical processing (1.581)
Adamczyk J. (Gliwice, Poland), Grajcar A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Anisotropy of plastic properties of the toughening steel plates rolled using the thermo-mechanical method (6.527)
Adamczyk J. (Gliwice, Poland), Opiela M. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Assesment of the feasibility of joining the amcs composites reinforced with intermetallics by the ressistance butt welding (1.810)
Adamiak M. (Gliwice, Poland), Gorka J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Experimental and numerical analysis of natural convection for al-5.5%cu alloy (1.277)
Akour S.N. (Jordan, Jordan), Jarrah M.A. (Sharjah, United Arab Emirates)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Charge materials and technology of melt and structure of gray cast iron (1.552)
Bartocha D. (Gliwice, Poland), Janerka K. (Gliwice, Poland), Suchon J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Filler dispersion and associated tribological properties of rubber (6.641)
Bielinski D.M. (Lodz, Poland), Dobrowolski O. (Lodz, Poland), Glab P. (Lodz, Poland), Slusarski L. (Lodz, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Implementation of apqp-concept in design of qms (1.416)
Bobrek M. (Banjaluka, Bosnia And Herzegovina), Sokovic M. (Ljubljana, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The specialties of fiber-reinforced plastics in terms of product lifecycle management (1.428)
Broekel J. (Rostock, Germany), Scharr G. (Rostock, Germany)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The expansion of the synthesized structures of mechanical discrete systems represented by polar graphs (1.593)
Buchacz A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Development of a programme system for data-point pre-processing in reverse engineering (1.417)
Budak I. (Novi Sad, Yugoslavia), Hodolic J. (Novi Sad, Yugoslavia), Sokovic M. (Ljubljana, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Mechanical and tribological characterization of tools coatings for dry tapping (1.335)
Bugliosi S. (Torino, Italy), Faga M.G. (Torino, Italy), Settineri L. (Torino, Italy)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Sustainability/ product life-cycle management (5.267)
Burke S. (Limerick, Ireland), Gaughran W. (Limerick, Ireland), Ryan A. (Limerick, Ireland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Changes in the structure of alloy on the matrix of feal intermetallic phase after primary crystallization and homogenizing treatment (1.446)
Cebulski J. (Katowice, Poland), Lalik S. (Katowice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Simulation of composite microregions solidification process (1.568)
Cholewa M. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Simulation of solidification process for composite micro region with incomplete wetting of reinforcing particle (1.569)
Cholewa M. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Influence of the anodic oxidation on the physicochemical properties of the ti6al4v eli alloy (1.706)
Chrzanowski W. (Gliwice, Poland), Szewczenko J. (Gliwice, Poland), Tyrlik-Held J. (Gliwice, Poland), Zak J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - An overview of data acquisition system for cutting force measuring and optimization in milling (1.368)
Cus F. (Maribor, Slovenia), Milfelner M. (Maribor, Slovenia), Balic J. (Maribor, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Fatigue life of friction stir welded al-mg alloys (1.363)
Czechowski M. (Gdynia, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure characteristics after rolling of magnesium alloys (1.808)
Cizek L. (Ostrava-poruba, Czech Republic), Greger M. (Ostrava-poruba, Czech Republic), Kocich R. (Ostrava-poruba, Czech Republic), Rusz S. (Ostrava-poruba, Czech Republic), Juricka I. (Hradec Kralové, Czech Republic), Dobrzanski L.A. (Gliwice, Poland), Tanski T. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Hydrogen assisted cracking of high-strength weldable steel in sea-water (1.347)
Cwiek J. (Gdansk, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - An overview of advanced materials for hydrogen storage (1.435)
David E. (Valcea, Romania)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Microstructure of ni(cr)-tic-cr3c2-cr7c3 composite powder (1.408)
Dercz G. (Katowice, Poland), Formanek B. (Katowice, Poland), Prusik K. (Katowice, Poland), Pajak L. (Katowice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The method of the production flow synchronisation using the meta-rule conception (1.555)
Dobrzanska-Danikiewicz A. (Gliwice, Poland), Krenczyk D. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The classification method and the technical condition evaluation of the critical elements’ material of power boilers in creep service made from the 12cr-1mo-v (1.813)
Dobrzanski J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Comparison of the structures of the hot-work tool steels laser modified surface layers (1.748)
Dobrzanski L.A. (Gliwice, Poland), Bonek M. (Gliwice, Poland), Hajduczek E. (Gliwice, Poland), Klimpel A. (Gliwice, Poland), Lisiecki A. (Gliwice, Poland),- Properties of vacuum sintered duplex stainless steels (1.723)
Dobrzanski L.A. (Gliwice, Poland), Brytan Z. (Gliwice, Poland), Actis Grande M. (Torino, Italy), Rosso M. (Torino, Italy), Pallavicini E.J. (Torino, Italy)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Properties of vacuum sintered duplex stainless steels (1.723)
- Corrosion resistance of the polymer matrix hard magnetic composite materials nd-fe-b (1.741)
Dobrzanski L.A. (Gliwice, Poland), Drak M. (Gliwice, Poland), Trzaska J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Laser texturisation of crystalline silicon for solar cells (1.820)
Dobrzanski L.A. (Gliwice, Poland), Drygala A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure and properties of the cutting tools made from cemented carbides and cermets with the tin+mono, gradient or multi (ti,al,si)n+tin nanocrystalline coatings (1.534)
Dobrzanski L.A. (Gliwice, Poland), Golombek K. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Effect of laser treatment on changes of the surface layers properties of the hot work alloy tool steels (1.832)
Dobrzanski L.A. (Gliwice, Poland), Jonda E. (Gliwice, Poland), Polok A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Design criteria used for optimization of the solution treatment for 3xxx series cast alloys (1.800)
Dobrzanski L.A. (Gliwice, Poland), Kasprzak K. (Gliwice, Poland), Sokolowski J. (Windsor, Canada)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Applications of the derivation analysis for assessment of the acalsi7cu alloy crystallization process cooled with different cooling rate (1.877)
Dobrzanski L.A. (Gliwice, Poland), Kasprzak W. (Windsor, Canada), Sokolowski J. (Windsor, Canada), Maniara R. (Gliwice, Poland), Krupinski M. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Methodology of the mechanical properties prediction for the metallurgical products from the engineering steels using the artificial intelligence methods (1.720)
Dobrzanski L.A. (Gliwice, Poland), Kowalski M. (Gliwice, Poland), Madejski J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Computer assisted classification of flaws identified with the radiographical methods in castings from the aluminium alloys (1.843)
Dobrzanski L.A. (Gliwice, Poland), Krupinski M. (Gliwice, Poland), Zarychta P. (Gliwice, Poland), Sokolowski J. (Windsor, Canada), Kasprzak W. (Windsor, Canada)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Microstructure investigations and hardness measurement in al-ti alloy (1.878)
Dobrzanski L.A. (Gliwice, Poland), Labisz K. (Gliwice, Poland), Maniara R. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Corrosion resistance of multilayer coatings deposited by pvd techniques onto the brass substrate (1.721)
Dobrzanski L.A. (Gliwice, Poland), Lukaszkowicz K. (Gliwice, Poland), Zarychta A. (Gliwice, Poland), Cunha L. (Braga, Portugal)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure and properties of pvd and cvd coated al2o3+tic mixed oxide tool ceramics for dry on high speed cutting processes (1.733)
Dobrzanski L.A. (Gliwice, Poland), Mikula J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Comparison of the structure and properties of the pvd and cvd coatings deposited on nitride tool ceramics (1.755)
Dobrzanski L.A. (Gliwice, Poland), Pakula D. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Laser treatment of surface layer over choosen hot work tool steels (1.793)
Dobrzanski L.A. (Gliwice, Poland), Piec M. (Gliwice, Poland), Labisz K. (Gliwice, Poland), Bonek M. (Gliwice, Poland), Lisiecki A. (Gliwice, Poland), Klimpel A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure and properties of wear resistance pvd coatings deposited onto x37crmov5-1 type hot work steel (1.745)
Dobrzanski L.A. (Gliwice, Poland), Polok M. (Gliwice, Poland), Adamiak M. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Employment of the artificial neural networks for prediction of the mechanical properties of constructional steels (1.833)
Dobrzanski L.A. (Gliwice, Poland), Sroka M. (Gliwice, Poland), Polok A. (Gliwice, Poland), Sliwa A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Employment of the finite element method for determining stresses in coatings obtained on high speed steel with the pvd process (1.734)
Dobrzanski L.A. (Gliwice, Poland), Sliwa A. (Gliwice, Poland), Kwasny W. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Influence of modification with chemical elements on structure of magnesium casting alloys (1.842)
Dobrzanski L.A. (Gliwice, Poland), Tanski T. (Gliwice, Poland), Cizek L. (Ostrava, Czech Republic)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure, properties and corrosion resistance of pm composite materials based on en aw-2124 aluminum alloy reinforced with the al2o3 ceramic particles (1.737)
Dobrzanski L.A. (Gliwice, Poland), Wlodarczyk A. (Gliwice, Poland), Adamiak M. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Al- feal-tial-al2o3 composite with hybrid reinforcement (1.397)
Dolata-Grosz A. (Katowice, Poland), Formanek B. (Katowice, Poland), Sleziona J. (Katowice, Poland), Wieczorek J. (Katowice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Quality estimation of process with usage control charts type x-r and quality capability of process cp ,cpk (1.577)
Dudek-Burlikowska M. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Modelling and synthesis of discrete – continuous subsystems of machines with damping (1.574)
Dymarek A. (Gliwice, Poland), Dzitkowski T. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Prediction of total manufacturing costs for stamping tool (1.364)
Ficko M. (Maribor, Slovenia), Drstvensek I. (Maribor, Slovenia), Brezocnik M. (Maribor, Slovenia), Balic J. (Maribor, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The use of networked ipc techniques in hybrid description of a simulation model (1.561)
Foit K. (Gliwice, Poland), Swider J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Intermetallic alloys with oxide particles and technological concept for high loaded materials (1.537)
Formanek B. (Katowice, Poland), Jozwiak S. (Warsaw, Poland), Szczucka-Lasota B. (Katowice, Poland), Dolata-Grosz A. (Katowice, Poland), Z. Bojar Z (Warsaw, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - New generation of protective coatings intended for the power industry (1.536)
Formanek B. (Katowice, Poland), Szymanski K. (Katowice, Poland), Szczucka-Lasota B. (Katowice, Poland), Wlodarczyk A. (Raciborz, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Increasing the stability of the deep drawing process by simulation-based optimization (1.372)
Gantar G. (Ljubljana, Slovenia), Kuzman K. (Ljubljana, Slovenia), Filipic B. (Ljubljana, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Investigations of the influence of filler on the properties of chosen polymer blends with compatibilizer addition. (1.702)
Gnatowski A. (Czestochowa, Poland), Koszkul J. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Characterization of a ni50ti50 shape memory strip produced by twin roll casting technique (1.440)
Goryczka T. (Katowice, Poland), Ochin P. (Vitry-sur-seine, France)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Integration of the cad/capp/ppc systems (1.469)
Grabowik C. (Gliwice, Poland), Kalinowski K. (Gliwice, Poland), Monica Z. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Finite element modelling of temperature distribution in the cutting zone in turning processes with differently coated tools (1.328)
Grzesik W. (Opole, Poland), Bartoszuk M. (Opole, Poland), Nieslony P. (Opole, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - A twin roll caster to cast wire-inserted composite strip (1.531)
Haga T. (Osaka, Japan), Takahashi K. (Osaka, Japan), Watari H. (Tochigi, Japan)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Effect of superheating temperatures on microstructure and properties of strontium modified aluminium-silicon eutectic alloy (1.516)
Haque M.M. (Kuala Lumpur, Malaysia), Ismail A.F. (Kuala Lumpur, Malaysia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Use of machines for liquid manure aerating and mixing (1.220)
Janzekovic M. (Maribor, Slovenia), Mursec B. (Maribor, Slovenia), Cus F. (Maribor, Slovenia), Ploj T. (Maribor, Slovenia), Janzekovic I. (Maribor, Slovenia), Zuperl U. (Maribor, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Preparation of materials based on ti-si-c system using high temperature – high pressure method (1.245)
Jaworska L. (Cracow, Poland), Stobierski L. (Cracow, Poland), Twardowska A. (Cracow, Poland), Krolicka D. (Cracow, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - High speed precise machine tools spindle units improving (1.594)
Jedrzejewski J. (Wroclaw, Poland), Kowal Z. (Wroclaw, Poland), Kwasny W. (Wroclaw, Poland), Modrzycki W. (Wroclaw, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Biomechanical analysis of stent – oesophagus system (1.584)
Kajzer W. (Gliwice, Poland), Kaczmarek M. (Gliwice, Poland), Marciniak J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Influence of cr, zr and nb on crystallization of amorphous alloys based on iron (1.407)
Karolus M. (Katowice, Poland), Kwapulinski P. (Katowice, Poland), Chrobak D. (Katowice, Poland), Haneczok G. (Katowice, Poland), Chrobak A. (Katowice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The properties of innovative sintered structural parts manufactured of elemental powders of iron, molybdenum and boron (1.576)
Karwan-Baczewska J. (Cracow, Poland), Rosso M. (Torino, Italy)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Implications of scale effects on the mechanical response (1.814)
Katz Y. ( , Israel), Gerberich W.W. (Minnesota, United States)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The study of properties of ni-wc wires surfaced deposits (1.501)
Klimpel A. (Gliwice, Poland), Lisiecki A. (Gliwice, Poland), Janicki D. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The study of properties of ni-w2c and co-w2c powders thermal sprayed deposits (1.502)
Klimpel A. (Gliwice, Poland), Lisiecki A. (Gliwice, Poland), Janicki D. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - A study of worn wear plates of fan blades of steel mill fumes suction system (1.503)
Klimpel A. (Gliwice, Poland), Janicki D. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Abrasion resistance of gma metal cored wires surfaced deposits (1.840)
Klimpel A. (Gliwice, Poland), Dobrzanski L.A. (Gliwice, Poland), Janicki D. (Gliwice, Poland), Lisiecki A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Evaluation of retained austenite stability in heat treated cold work tool steel (1.619)
Kokosza A. (Cracow, Poland), Pacyna J. (Cracow, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Hard inclusions in fixture brasses (1.562)
Kondracki M. (Gliwice, Poland), Gawronski J. (Gliwice, Poland), Szajnar J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Intermetallic phases influence on solidification process of fixture brasses (1.565)
Kondracki M. (Gliwice, Poland), Gawronski J. (Gliwice, Poland), Szajnar J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Soft magnetic nanocomposite with powdered metallic ribbon based on cobalt and polymer matrix (1.726)
Konieczny J. (Gliwice, Poland), Dobrzanski L.A. (Gliwice, Poland), Nowosielski R. (Gliwice, Poland), Przybyl A. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Grinding analysis based on the matrix experiment (1.422)
Kopac J. (Ljubljana, Slovenia), Krajnik P. (Ljubljana, Slovenia), D'aniceto J.M. (Girona, Spain)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Incremental sheet metal forming on cnc milling machine-tool (1.424)
Kopac J. (Ljubljana, Slovenia), Kampus Z. (Ljubljana, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Failure analysis of dies for aluminium alloys die-casting (1.427)
Kosec B. (Ljubljana, Slovenia), Sokovic M. (Ljubljana, Slovenia), Kosec G. (Jesenice, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Internal oxidation of ag – alloys with te, se and s (1.434)
Kosec G. (Jesenice, Slovenia), Anzel I. (Ljubljana, Slovenia), Bruncko M. (Ljubljana, Slovenia), Kosec L. (Ljubljana, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Modeling of manufacturing systems and robot motions (1.466)
Kost G. (Gliwice, Poland), Zdanowicz R. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Factors influencing accuray of properties tests of thin coatings systems (1.252)
Koutsky J. (Plzen, Czech Republic)- Corrosion resistance of intramedullary nails used in elastic osteosynthesis of children (1.583)
Krauze A. (Gliwice, Poland), Ziebowicz A. (Gliwice, Poland), Marciniak J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Corrosion resistance of intramedullary nails used in elastic osteosynthesis of children (1.583)
- The deadlock protection method used in the production systems (1.510)
Krenczyk D. (Gliwice, Poland), Dobrzanska-Danikiewicz A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The attempt of evaluation of the chosen technological gear wheel process on the basis of its efficiency operation (1.627)
Krupinska B. (Gliwice, Poland), Szewieczek D. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Comparision of the friction and wear properties of titanium and oxidised titanium in dry sliding against sintered high speed steel HS18-0-1 and against C45 carbon steel (1.384)
Krol S. (Opole, Poland), Zalisz Z. (Opole, Poland), Hepner M. (Opole, Poland)- Vacuum carburizing – process optimization (1.695)
Kula P. (Lodz, Poland), Pietrasik R. (Lodz, Poland), Dybowski K. (Lodz, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Vacuum carburizing – process optimization (1.695)
- Temperature of nanocrystallisation of magnetically soft alloys for high temperature applications (1.638)
Kulik T. (Warsaw, Poland), Ferenc J. (Warsaw, Poland), Kowalczyk M. (Warsaw, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Quantitative structural analysis of c-mn-b steel cooled with different cooling rates (1.447)
Kupczyk J. (Czestochowa, Poland), Lis A.K (Czestochowa, Poland), Koczurkiewicz B. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure, physical properties and fractal character of surface topography of the ti+tic coatings on sintered high speed steel (1.743)
Kwasny W. (Gliwice, Poland), Dobrzanski L.A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Determination of crack resistance on the basis of the j integral for talc filled pp and pa composites (1.694)
Kwiatkowski D. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Processing and properties of c-mn steel with dual-phase microstructure (1.441)
Lis A.K (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Microstructure of rapid solidified cu-al-ni shape memory alloy ribbons (1.433)
Lojen G. (Maribor, Slovenia), Anzel I. (Maribor, Slovenia), Kneissl A.C. (Leoben, Austria), Krizman A. (Maribor, Slovenia), Unterweger E. (Leoben, Austria), Kosec B. (Ljubljana, Slovenia), Bizjak M. (Ljubljana, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Surface observation by afm of marble samples after thermal treatment (1.696)
Lopes J. (Evora, Portugal), Nunes Y. (Caparica, Portugal), Maneira M.J.p. (Caparica, Portugal), Dos Santos M.P. (Evora, Portugal)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - A step forward to ed machining of wc-co (1.218)
Mahdavinejad R. (Tehran, Iran)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Algorithm of mould thermal parameters identification in the system casting – mould - environment (1.491)
Majchrzak E. (Gliwice, Poland), Mendakiewicz J. (Gliwice, Poland), Piasecka-Belkhayat A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Study of roundness on cylindrical bars turned of aluminium-cooper alloys uns a92024 (1.241)
Marcos-Barcena M. (Cadiz, Spain), Sebastian-Péreza M.A. (Madrid, Spain), Contreras-Samper J.P. (Cadiz, Spain), Sanchez Carrilero M. (Cadiz, Spain), Sanchez-Lopez M. (Cadiz, Spain), Sanchez-Sola J.M. (Cadiz, Spain)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Comparison of structure and properties of the hs12-1-5-5 type high-speed steel fabricated using the pressureless forming and pim methods (1.749)
Matula G. (Gliwice, Poland), Dobrzanski L.A. (Gliwice, Poland), Varez A. (Leganés, Spain), Levenfeld B. (Leganés, Spain), Torralba J.M. (Leganés, Spain)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The usage of the balanced scorecard to the estimation of the enterprise’s effectiveness (1.545)
Michalska J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Environmental management inside production systems (1.725)
Mijanovic K. (Sarajevo, Bosnia And Herzegovina), Kopac J. (Ljubljana, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Genetic equation for the cutting force in ball-end milling (1.332)
Milfelner M. (Maribor, Slovenia), Kopac J. (Ljubljana, Slovenia), Cus F. (Maribor, Slovenia), Zuperl U. (Maribor, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Oxidation of liquid Al-7Si alloys containing strontium and magnesium (6.219)
Miresmaeili S.M. (Tehran, Iran)- Multiscale model of segregation process (1.544)
Mochnacki B. (Czestochowa, Poland), Lara S. (Czestochowa, Poland), Pawlak E. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Multiscale model of segregation process (1.544)
- Influence of heat treatment on the microstructure and mechanical properties of 6005 and 6082 aluminium alloys (1.839)
Mrowka-Nawotnik G. (Rzeszow, Poland), Sieniawski J. (Rzeszow, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Influence of ni-atoms addition on the structure of in-ga-sn liquid ternary eutectic alloy (1.718)
Mudry S. (Lviv, Ukraine), Prokhorenko V. (Lviv, Ukraine), Prokhorenko S. (Lviv, Ukraine), Shtablavyj I. (Lviv, Ukraine), Panas A. (Warsaw, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The influence of input data on the results of injection molding process simulation (1.711)
Nabialek J. (Czestochowa, Poland), Koszkul J. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Evolutionary design of generalized polynomial neural networks for modelling and prediction of explosive forming process (1.242)
Nariman-Zadeh N. (Rasth, Iran), Darvizeh A. (Rasth, Iran), Jamali A. (Rasth, Iran), Moeini A. (Tehran, Iran)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - A problem of emphasizing features of a surface roughness by means the discrete wavelet transform (1.321)
Niola V. (Naples, Italy), Nasti G. (Naples, Italy), Quaremba G. (Naples, Italy)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Tin influence on cutting behaviour of diamond sawblades for stone cutting (1.724)
Nitkiewicz Z. (Czestochowa, Poland), Swierzy M. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure and properties of the heat affected zone of duplex steels welded joints (1.841)
Nowacki J. (Szczecin, Poland), Lukojc A. (Szczecin, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Welding imperfections of submerged arc welded duplex steel joints in aspects of the welding heat input (1.595)
Nowacki J. (Szczecin, Poland), Rybicki P. (Szczecin, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure and properties of fe-6,67%c alloy obtained by mechanical alloying (1.625)
Nowosielski R. (Gliwice, Poland), Pilarczyk W. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The effect of ductility minimum temperature in cuni25 alloy (1.699)
Nowosielski R. (Gliwice, Poland), Sakiewicz P. (Gliwice, Poland), Gramatyka P. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Ferromagnetic properties of polymer nanocomposites containing fe78si9b13 powder particles (1.563)
Nowosielski R. (Gliwice, Poland), Wyslocki J. (Czestochowa, Poland), Wnuk I. (Czestochowa, Poland), Sakiewicz P. (Gliwice, Poland), Gramatyka P. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Chemical pipelines material fatigue (1.837)
Okrajni J. (Katowice, Poland), Mutwil K. (Katowice, Poland), Cieslar M. (Katowice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The relationship between hot ductility and intergranular fracture in an cusn6p alloy at elevated temperatures (1.620)
Ozgowicz W. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The kinetic of phase transformation during continuous heating from quenched state of new high-carbon alloy steel (6.617)
Pacyna J. (Cracow, Poland), Bala P. (Cracow, Poland), Skrzypek T. (Cracow, Poland)- Failure mode analysis using axiomatic design and non-probabilistic information (1.411)
Pappalardo M. (Salerno, Italy), Naddeo A. (Salerno, Italy)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Failure mode analysis using axiomatic design and non-probabilistic information (1.411)
- Modeling of manufacturing processes by learning systems: the naïve bayesian classifier versus artificial neural networks (1.303)
Perzyk M. (Warsaw, Poland), Biernacki R. (Warsaw, Poland), Kochanski A. (Warsaw, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The quantitative analysis of ferritic-pearlitic structure wire rod c20d steel (1.528)
Piwek N. (Czestochowa, Poland), Kolan C. (Czestochowa, Poland), Lis A.K (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Influence of processing conditions on changing of shrinkage and mass pom injection molding parts (1.700)
Postawa P. (Czestochowa, Poland), Koszkul K. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Optimisation of soft magnetic properties in Fe83-xCoxNb3B13Cu1 (x=10, 30, 40) amorphous alloys (6.628)
Raszka T. (Gliwice, Poland), Przybyl A. (Czestochowa, Poland)- Analysis of the ability of semi-solid thixocast structures to stand tensile stresses (1.548)
Robert M.H. (Campinas, Brazil), Arrieux R. (Annecy-le-vieux, France), Pires G.P. (Campinas, Brazil), Bubenik R.L. (Campinas, Poland)- Ultrasonic methods in diagnostics of epoxy-glass composites (1.747)
Rojek M. (Gliwice, Poland), Stabik J. (Gliwice, Poland), Wrobel G. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Analysis of the ability of semi-solid thixocast structures to stand tensile stresses (1.548)
- The influence of casting process on quality and performances on al based automotive components (1.794)
Rosso M. (Alessandria, Italy)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Study of coatings to be applied on metal appliances for the picking up of agricultural products. (1.817)
Rosso M. (Turin, Italy), Actis Grande M. (Turin, Italy), Ugues D. (Turin, Italy)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Chosen aspects of evaluation of productive processes on the example of productive chains of sections type v29. (1.739)
Roszak M. (Gliwice, Poland), Tkaczyk S. (Warsaw, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Mathematical modeling for ecap technology of multiple forming (1.809)
Rusz S. (Ostrava - Poruba, Czech Republic), Greger M. (Ostrava - Poruba, Czech Republic), Cizek L. (Ostrava - Poruba, Czech Republic), Dobrzanski L.A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - An investigation into additive methods of PCB maunfacture (5.266)
Ryan A. (Limerick, Ireland), Lewis H. (Limerick, Ireland)- Safe metal packaging for foodstuffs (1.790)
Salmén K. (Stockholm, Sweden), Thim K-y (Stockholm, Sweden), Rybak K. (Warsaw, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Safe metal packaging for foodstuffs (1.790)
- Forming single and double-flange components using differential heating (1.240)
Schlemmer K.L. (Aachen, Germany), Osman F.H. (Bath, United Kingdom)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Manganese-nitrogen-sulphur surface layers produced on aluminium alloys (1.301)
Serbinski W. (Gdansk, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Hybrid graphs in modelling and analysis of discrete – continuous mechanical systems (1.559)
Sekala A. (Gliwice, Poland), Swider J. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The study of a measurement system precision (1.258)
Simion C.M. (Sibiu, Romania)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Application of genetic methods in materials’ design (1.811)
Sitek W. (Gliwice, Poland), Dobrzanski L.A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Mathematical modelling of austenite decomposition during the quenching (1.642)
Smoljan B. (Rijeka, Croatia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Simulation of hardness distribution in quenched steel specimen (1.703)
Smoljan B. (Rijeka, Croatia), Tomasic N. (Rijeka, Croatia), Rubesa D. (Rijeka, Croatia), Smokvina Hanza S. (Rijeka, Croatia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Use of 3d-scanning and reverse engineering by manufacturing of complex shapes (1.418)
Sokovic M. (Ljubljana, Slovenia), Cedilnik M. (Ljubljana, Slovenia), Kopac J. (Ljubljana, Slovenia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - cutting properties of the al2o3+sic(w) based tool ceramic reinforced with the pvd and cvd wear-resistant coatings (1.838)
Sokovic M. (Ljubljana, Slovenia), Mikula J. (Gliwice, Poland), Dobrzanski L.A. (Gliwice, Poland), Kopac J. (Ljubljana, Slovenia), Kosec L. (Ljubljana, Slovenia), Panjan P. (Ljubljana, Slovenia), Madejski J. (Gliwice, Poland), Piech A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Application of six sigma methodology for process design quality improvement (1.414)
Sokovic M. (Ljubljana, Slovenia), Pavletic D. (Rijeka, Croatia), Fakin S. (Buzet, Croatia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Testing of machinability of 40crmnmo7 steel using genetic algorithm (1.704)
Stoic A. (Slavonski Brod, Croatia), Kopac J. (Ljubljana, Slovenia), Cukor G. (Rijeka, Croatia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Growth of corrosion products on thermally sprayed coatings with feal intermetallic phases in aggressive environments (1.518)
Szczucka-Lasota B. (Katowice, Poland), Formanek B. (Katowice, Poland), Hernas A. (Katowice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Oxidation models of the growth of corrosion products on the intermetallic coatings strengthened by a fine dispersive al2o3 (1.519)
Szczucka-Lasota B. (Katowice, Poland), Formanek B. (Katowice, Poland), Hernas A. (Katowice, Poland), Szymanski K. (Katowice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Electrochemical corrosion and its influence on magnetic properties of fe75,5si13,5b9nb3cu1 alloy (1.591)
Szewieczek D. (Gliwice, Poland), Baron A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Influence of structure on the evolution of magnetic and mechanical properties of amorphous and nanocrystalline fe85.4hf1.4b13.2 alloy (1.585)
Szewieczek D. (Gliwice, Poland), Lesz S. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Relationship between microstructure of laser alloyed of c45 steel and its cavitation resistance (1.237)
Szkodo M. (Gdansk, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Mathematical description and evaluation of cavitation erosion resistance of materials (1.238)
Szkodo M. (Gdansk, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Modified indentation methods for fracture toughness determination of alumina ceramics (1.523)
Szutkowska M. (Cracow, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The application of object methods for functional features representation (1.549)
Swider J. (Gliwice, Poland), Herbus K. (Gliwice, Poland), Ociepka P. (Gliwice, Poland)- Physical and geometrical data acquiring system for vibration analysis software (1.712)
Swider J. (Gliwice, Poland), Michalski P. (Gliwice, Poland), Wszolek G. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Physical and geometrical data acquiring system for vibration analysis software (1.712)
- Testing device for electrical car networks (1.496)
Swider J. (Gliwice, Poland), Michalski P. (Gliwice, Poland), Wszolek G. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Programmable controller designed for electro-pneumatic systems (1.507)
Swider J. (Gliwice, Poland), Wszolek G. (Gliwice, Poland), Carvalho W. (São Paulo, Brazil)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Modelling of formula for flow stress of a magnesium alloy az31 sheet at elevated temperatures (1.210)
Takuda H. (Kyoto, Japan), Morishita T. (Kyoto, Japan), Kinoshita T. (Osaka, Japan), Shirakawa N. (Osaka, Japan)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Characteristic defects of metallic coatings obtained in the metallization process (1.753)
Topolska S. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Mechanical properties of an as21 alloy reinforced by short saffil fibres and sic particles (1.517)
Trojanova Z. (Praha, Czech Republic), Szaraz Z. (Praha, Czech Republic), Lukac P. (Praha, Czech Republic)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Compressive deformation behaviour of magnesium alloys (1.430)
Trojanova Z. (Praha, Czech Republic), Lukac P. (Praha, Czech Republic)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Application of neural networks for designing the chemical composition of steel with the assumed hardness after cooling from the austenitising temperature (1.732)
Trzaska J. (Gliwice, Poland), Dobrzanski L.A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Design of polimer concrete main spindle housing for cnc lathe (1.415)
Vrtanoski G. (Skopje, Macedonia), Dukovski V. (Skopje, Macedonia)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Experimental and numerical biomechanical analysis of vascular stent (1.582)
Walke W. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The course of the peritectic transformation in the al-rich al-fe-mn-si alloys (1.498)
Warmuzek M. (Cracow, Poland), Rabczak K. (Cracow, Poland), Sieniawski J. (Rzeszow, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Oxidation resistance of nanocrystalline microalloyed g-tial coatings (1.640)
Wendler B. (Lodz, Poland), Kaczmarek L. (Lodz, Poland), Klimek L. (Lodz, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Modelling of mechanical system vibrations by utilisation of the grafsim software (1.476)
Wszolek G. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - A methodology for the prediction of standard steady-state wear coefficient in an aluminium-based matrix composite reinforced with alumina particles (1.327)
Yang L.J. (Singapore, Singapore)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - The kinetics of phase transformations during tempering in structural steels with nickel (1.609)
Zajac G. (Cracow, Poland), Pacyna J. (Cracow, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Characterization of the co-base layers obtained by laser cladding technique (1.259)
Zielinski A. (Gdansk, Poland), Smolenska H. (Gdansk, Poland), Serbinski W. (Gdansk, Poland), Konczewicz W. (Gdynia, Poland), Klimpel A. (Gliwice, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005) - Structure and properties of the composite materials consisting of the nanocrystalline fe73.5cu1nb3si13.5b9 alloy powders and polyethylene (1.775)
Ziebowicz B. (Gliwice, Poland), Szewieczek D. (Gliwice, Poland), Dobrzanski L.A. (Gliwice, Poland), Wyslocki J. (Czestochowa, Poland), Przybyl A. (Czestochowa, Poland)
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005)
 |
|||||
|
 |
|
 |
|
 |
|
|
|
|||
Vol. 13 Proceedings of AMME'2005 (16-19 May 2005)